The Titanium
You’re Looking For
We offer a wide range of sizes and
grades, with quality you can count on.
In Our Industry, Nothing is More
Important Than Quality
Here’s how we make sure you get titanium you can count on:
Certified to AS9100D and ISO 9001:2015, ensuring consistent quality and accountability.
Every titanium order includes mill test reports or certifications demonstrating specification compliance.
With precise cuts and protective packaging, your material arrives exactly as expected.
Grades
Performance Titanium stocks the following Grades of
Alloyed and Unalloyed Titanium:
6AL-4V
Alternate Names: Grade 5 Titanium, 6-4 Titanium
Description: 6AL-4V is the most common alloy of Titanium. As an alloyed Grade of Titanium, it is strengthened by the inclusion of roughly 6% Aluminum and 4% Vanadium. It is known as an alpha-beta Titanium alloy, containing both alpha and beta phases at room temperature. 6AL-4V typically comes in the Annealed condition, but it can be strengthened by heat treatment, such as Solution Treating and Aging. 6AL-4V offers good weldability. Overall, 6AL-4V exhibits high strength, light weight, and corrosion resistance, which make it an excellent choice for applications in aerospace, medical, oil and gas, marine, and recreational industries.
Machinability: The American Iron and Steel Institute (AISI) determined a rating system of machinability of different materials. 160 Brinell B1112 steel was arbitrarily assigned a machinability rating of 100%. Using this as a comparable standard, ratings less than 100% are more challenging to machine, and ratings more than 100% are easier to machine. Titanium 6AL-4V is rated at 22% of B1112. Low cutting speeds, heavy feed rates, sharp tools, and ample cutting fluid are prescribed.
6AL-4V Titanium is available in the following Product Forms:
Round Bar (Rod), Rectangular Flat Bar (Block), Plate, and Sheet.
6AL-4V Titanium is available in the following Specifications:
The use of this information is strictly voluntary and should be used as a guideline only. This data contains generalizations and is in no way a substitute for your own research. This information is not intended as a warranty or fitness of any application. Should you require further information about Titanium 6AL-4V Grade 5, please contact us and we will gladly refer you to additional sources.
6AL-4V Eli
Alternate Names: Grade 23 Titanium, 6-4 Eli Titanium
Description: 6AL-4V Eli is an alloyed Grade of Titanium. It is strengthened by the inclusion of roughly 6% Aluminum and 4% Vanadium. Titanium 6AL-4V Eli (Extra-Low Interstitial) is considered a higher purity than 6AL-4V Grade 5 due to its lower inclusions of Iron, and the interstitial elements, Carbon and Oxygen. 6AL-4V Eli typically comes in the annealed condition, but can be found in beta annealed condition as well. 6AL-4V Eli Grade 23 shows high strength and toughness, as well as good corrosion resistance. It is found in aerospace applications where fracture toughness and fatigue strength are important. As a biocompatible Grade of Titanium, it is also known for its applications in medical and dental industries.
Machinability: The American Iron and Steel Institute (AISI) determined a rating system of machinability of different materials. 160 Brinell B1112 steel was arbitrarily assigned a machinability rating of 100%. Using this as a comparable standard, ratings less than 100% are more challenging to machine, and ratings more than 100% are easier to machine. Titanium 6AL-4V Eli is rated at 22% of B1112. Low cutting speeds, heavy feed rates, sharp tools, and ample cutting fluid are prescribed.
6AL-4V Eli Titanium is available in the following Product Forms:
Round Bar (Rod), Rectangular Flat Bar (Block), Plate, and Sheet.
6AL-4V Eli Titanium is available in the following Product Forms:
The use of this information is strictly voluntary and should be used as a guideline only. This data contains generalizations and is in no way a substitute for your own research. This information is not intended as a warranty or fitness of any application. Should you require further information about Titanium 6AL-4V Grade 5, please contact us and we will gladly refer you to additional sources.
CP Grade 4
Alternate Names: CP Grade 4 Titanium, CP 4, Grade 4, CP 70
Description: Commercially Pure (CP) Grade 4 Titanium is a grade of unalloyed titanium. CP Titanium mechanical properties are controlled by chemistry; specifically the input of Nitrogen, Oxygen and Iron which will increase strength of material. CP Grade 4 is higher in strength than CP Grades 1, 2, and 3. It is also commonly called “CP 70” which is in reference to its approximate yield strength. CP Grade 4 exhibits excellent corrosion resistance, as well as high strength. It is used in a variety of industries such as chemical, marine and aerospace.
Machinability: Low cutting speeds, heavy feed rates, sharp tools, and ample cutting fluid are prescribed.
CP Grade 4 Titanium is available in the following Product Forms:
Round Bar (Rod), Plate, and Sheet.
CP Grade 4 Titanium is available in the following Specifications:
The use of this information is strictly voluntary and should be used as a guideline only. This data contains generalizations and is in no way a substitute for your own research. This information is not intended as a warranty or fitness of any application. Should you require further information about Titanium 6AL-4V Grade 5, please contact us and we will gladly refer you to additional sources.
6AL-6V-2SN
Alternate Names: 662 Titanium
Description: 6AL-6V-2SN is an alloyed Grade of alpha-beta Titanium. 6AL-6V-2SN is similar to 6AL-4V in many ways, but exhibits higher strength properties due to additional Vanadium, Iron, and Copper. Welding is not typically recommended. 6AL-6V-2SN is often found in the Annealed condition, or heat treated to the higher strength Solution Treated & Aged condition. 6AL-6V-2SN exhibits extra high strength, and light weight. It is often used in aerospace, and oil & gas applications.
Machinability: Low cutting speeds, heavy feed rates, sharp tools, and ample cutting fluid are prescribed.
6AL-6V-2SN Titanium is available in the following Product Forms:
Round Bar (Rod), Rectangular Flat Bar (Block), Plate, and Sheet.
6AL-6V-2SN Titanium is available in the following Specifications:
The use of this information is strictly voluntary and should be used as a guideline only. This data contains generalizations and is in no way a substitute for your own research. This information is not intended as a warranty or fitness of any application. Should you require further information about Titanium 6AL-4V Grade 5, please contact us and we will gladly refer you to additional sources.
CP Grade 2
Alternate Names: CP Grade 2 Titanium, CP 2, Grade 2, CP 40
Description: Commercially Pure (CP) Grade 2 Titanium is one of the most common grades of unalloyed titanium. CP Titanium mechanical properties are controlled by chemistry; specifically the input of Nitrogen, Oxygen and Iron which will increase strength of material. CP Grade 2 is higher in strength than CP Grade 1, but lower than CP Grades 3 and 4. It is also commonly called “CP 40” which is in reference to its approximate yield strength. It is an attractive grade of titanium due to its excellent corrosion resistance, good formability, and limited strength. It is used in a variety of industries such as chemical, marine, medical, recreational, and aerospace.
Machinability: Low cutting speeds, heavy feed rates, sharp tools, and ample cutting fluid are prescribed.
CP Grade 2 Titanium is available in the following Product Forms:
Round Bar (Rod), Plate, and Sheet.
CP Grade 2 Titanium is available in the following Specifications:
The use of this information is strictly voluntary and should be used as a guideline only. This data contains generalizations and is in no way a substitute for your own research. This information is not intended as a warranty or fitness of any application. Should you require further information about Titanium 6AL-4V Grade 5, please contact us and we will gladly refer you to additional sources.
Others
Contact us about additional product offerrings
To estimate the weight of your final order, or convert
your titanium measurements
Titanium Product Forms
Performance Titanium offers the following Titanium Product Forms:
Rod and Round Bar
Rolled Plate
Rectangular Bar
Sheet
