ASTM F67 CP GRADE 4

ASTM F67 Grade 4
Revision: “-13” issued 2013
Grade: Commercially Pure Grade 4
Product Forms: Unalloyed Titanium, for Surgical Implant Applications (Strip,
Sheet, Plate, Bar, Billet, Forging, and Wire)

Please note, the ASTM F67 specification covers various Grades. This Spec Sheet is only for the Grade listed above.

Composition Analysis
Iron (Maximum): 0.50%Hydrogen (Maximum): 0.015%
Oxygen (Maximum): 0.40%Nitrogen (Maximum): 0.05%
Carbon (Maximum): 0.08%Titanium: Balance

 

Tensile Properties (Minimums)*
Tensile: 80 ksiElongation: 15%
Yield: 70 ksiReduction of Area: 25%

*Tensile property requirements vary based on orientation, section thickness/diameter, and cognizant engineering organization requirements.

Required Acceptance Tests

  • Chemical Composition
  • Tensile Properties
  • Surface Contamination

Disclaimer
The use of this information is strictly voluntary. Information may contain typographical errors, and should be used as a guideline only. This Material Spec Sheet contains generalizations and is in no way a substitution for the ASTM F67 specification.

To purchase ASTM F67, please visit: http://www.astm.org/Standards/F67

Changes may be made to the information contained herein.

PERFORMANCE TITANIUM GROUP: A CUT ABOVE THE REST