AMS-T-9046 CP-1 GRADE 4
Revision: “A” issued 07/2002 ***Obsolete, S/S by AMS 4901***
Grade: Commercially Pure Grade 4 (CP-1, 70 ksi min yield)
Product Forms: Titanium and Titanium Alloy, Sheet, Strip, and Plate
Please note, the AMS-T-9046 specification covers various Alloys and Conditions. This Spec Sheet is only for the Alloy and Condition listed above.
|Carbon (Maximum): 0.08%||Hydrogen (Maximum): 0.015%|
|Nitrogen (Maximum): 0.05%||Other Elements (Total): 0.30%|
|Iron (Maximum): 0.50%||Titanium: Balance|
|Oxygen (Maximum): 0.40%|
|Tensile Properties (Minimums)*|
|Tensile: 80 ksi Min||Elongation: 15% Min|
|Yield: 70 – 95 ksi|
*Tensile property requirements vary based on orientation, section thickness, and cognizant engineering organization requirements.
Required Acceptance Tests
- Chemical Composition
- Ultrasonic (where required)
- Tensile Properties
- Bend Test (where required)
The use of this information is strictly voluntary. Information may contain typographical errors, and should be used as a guideline only. This Material Spec Sheet contains generalizations and is in no way a substitution for the AMS-T-9046 specification.
To purchase AMS-T-9046A, please visit: http://standards.sae.org/amst9046a/
Changes may be made to the information contained herein.