ASTM F136

ASTM F136
Revision: “-13” issued 2013
Alloy: 6AL-4V Eli
Product Forms: Titanium Alloy Strip, Sheet, Plate, Bar, Forging Bar, and Wire
Condition: Annealed

Composition Analysis
Aluminum: 5.5 – 6.5%Carbon (Maximum): 0.08%
Vanadium: 3.5 – 4.5%Nitrogen (Maximum): 0.05%
Iron (Maximum): 0.25%Hydrogen (Maximum): 0.012%
Oxygen (Maximum): 0.13%Titanium: Balance

 

Tensile Properties (Minimums)*
Tensile: 120 – 125 ksiElongation: 8 – 10%
Yield: 110 – 115 ksiReduction of Area: 15 – 25%

*Tensile property requirements vary based on orientation, section thickness/diameter, and cognizant engineering organization requirements.

Required Acceptance Tests

  • Chemical Composition
  • Tensile Properties
  • Bend Testing (where required)
  • Microstructure
  • Surface Contamination

Disclaimer
The use of this information is strictly voluntary. Information may contain typographical errors, and should be used as a guideline only. This Material Spec Sheet contains generalizations and is in no way a substitution for the ASTM F136 specification.

To purchase ASTM F136-13, please visit: http://www.astm.org/Standards/F136.htm

Changes may be made to the information contained herein.

PERFORMANCE TITANIUM GROUP: A CUT ABOVE THE REST