AMS 4928

AMS 4928
Revision: “W” issued 12/2017
Alloy: 6AL-4V
Product Forms: Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes
Condition: Annealed

Composition Analysis
Aluminum: 5.5 – 6.75% Nitrogen (Maximum): 0.05%
Vanadium: 3.5 – 4.5% Hydrogen (Maximum): 0.0125%
Iron (Maximum): 0.30% Yttrium (Maximum): 0.005%
Oxygen (Maximum): 0.20% Other Elements (Total): 0.40%
Carbon (Maximum): 0.08% Titanium: Balance

 

Tensile Properties (Minimums)*
Tensile: 130 – 135 ksi Elongation: 8 – 10%
Yield: 119 – 125 ksi Reduction of Area: 15 – 25%

*Tensile property requirements vary based on orientation, section thickness/diameter, and cognizant engineering organization requirements.

Required Acceptance Tests

  • Chemical Composition
  • Tensile Properties
  • Microstructure
  • Surface Contamination

Disclaimer
The use of this information is strictly voluntary. Information may contain typographical errors, and should be used as a guideline only. This Material Spec Sheet contains generalizations and is in no way a substitution for the AMS 4928 specification.

To purchase AMS 4928W, please visit: http://standards.sae.org/ams4928w/

Changes may be made to the information contained herein.

PERFORMANCE TITANIUM GROUP: A CUT ABOVE THE REST