ASTM B265 GRADE 2

ASTM B265 Grade 2
Revision: “-20a” issued 2020
Grade: Commercially Pure Grade 2
Product Forms: Titanium and Titanium Alloy Strip, Sheet, and Plate
Condition: Annealed

Please note, the ASTM B265 specification covers various Alloys. This Spec Sheet is only for the Grade listed above.

Composition Analysis
Iron (Maximum): 0.30% Hydrogen (Maximum): 0.015%
Oxygen (Maximum): 0.25% Other Elements (Maximum, Each): 0.10%
Carbon (Maximum): 0.08% Other Elements (Total): 0.40%
Nitrogen (Maximum): 0.03% Titanium: Balance

 

Tensile Properties (Minimums)*
Tensile: 50 ksi Elongation: 20%
Yield: 40 – 65 ksi

*Tensile property requirements vary based on orientation, section thickness, and cognizant engineering organization requirements.

Required Acceptance Tests

  • Chemical Composition
  • Tensile Properties

Disclaimer
The use of this information is strictly voluntary. Information may contain typographical errors, and should be used as a guideline only. This Material Spec Sheet contains generalizations and is in no way a substitution for the ASTM B265 specification.

To purchase ASTM B265-20a, please visit: http://www.astm.org/Standards/B265.htm

Changes may be made to the information contained herein.

PERFORMANCE TITANIUM GROUP: A CUT ABOVE THE REST