Commercially Pure Grade 4 Titanium

Alternate Names: CP Grade 4 Titanium, CP 4, Grade 4, CP 70

Description: Commercially Pure Grade 4 Titanium is a Grade of unalloyed Titanium. In Commercially Pure Titanium, the mechanical properties are controlled by the chemistry input; higher amounts of Nitrogen, Oxygen, and Iron will increase strength properties. CP Grade 4 is higher in strength than CP Grade 1, 2, and 3. It is sometimes referred to as “CP 70” due to its approximate yield strength. CP Grade 4 Titanium typically comes in the Annealed condition. This Grade of Titanium exhibits excellent corrosion resistance, as well as high strength. It is used in a variety of industries such as chemical, marine, and aerospace.

Machinability: Low cutting speeds, heavy feed rates, sharp tools, and ample cutting fluid are prescribed.

CP Grade 4 Titanium is available in the following Product Forms:
Round Bar (Rod), Plate, and Sheet

Performance Titanium commonly sells CP Grade 4 Titanium to the following Specifications:

AMS 4901ASTM B348 Grade 4AMS-T-9047 (CP-70 Grade 4)
AMS 4921ASTM F67 Grade 4MIL-T-9046 (CP-1 Grade 4)
ASTM B265 Grade 4AMS-T-9046 (CP-1 Grade 4)MIL-T-9047 (CP-70 Grade 4)

 

Don’t see what you want? Call us at 888-772-8984 for a Quote on CP Grade 4 Titanium, or Email us at Sales@performancetitanium.com!

The use of this information is strictly voluntary and should be used as a guideline only. This data contains generalizations and is in no way a substitute for your own research. This information is not intended as a warranty or fitness of any application. Should you require further information about Titanium CP Grade 4, please contact us and we will gladly refer you to additional sources.

PERFORMANCE TITANIUM GROUP: A CUT ABOVE THE REST