MIL-T-9046 AB-1 6AL-4V
Revision: “J” issued 01/1983 ***Obsolete, S/S by AMS-T-9046***
Alloy: 6AL-4V “AB-1”
Product Forms: Titanium and Titanium Alloy, Sheet, Strip, and Plate
Please note, the MIL-T-9046 specification covers various Alloys and Conditions. This Spec Sheet is only for the Alloy and Condition listed above.
|Aluminum: 5.5 – 6.75%||Nitrogen (Maximum): 0.05%|
|Vanadium: 3.5 – 4.5%||Hydrogen (Maximum): 0.0125%|
|Iron (Maximum): 0.30%||Other Elements (Maximum, Each): 0.10%|
|Oxygen (Maximum): 0.20%||Other Elements (Total): 0.40%|
|Carbon (Maximum): 0.08%||Titanium: Balance|
|Tensile Properties (Minimums)*|
|Tensile: 130 – 134 ksi||Elongation: 8 – 10%|
|Yield: 120 – 126 ksi|
*Tensile property requirements vary based on orientation, section thickness, and cognizant engineering organization requirements.
Required Acceptance Tests
- Chemical Composition
- Ultrasonic (where required)
- Tensile Properties
- Bend Test (where required)
The use of this information is strictly voluntary. Information may contain typographical errors, and should be used as a guideline only. This Material Spec Sheet contains generalizations and is in no way a substitution for the MIL-T-9046 specification.
To download MIL-T-9046J, please visit: https://assist.dla.mil/online/start/
Changes may be made to the information contained herein.