AMS-T-9046 AB-1 6AL4V

AMS-T-9046
Revision: “A” issued 07/2002 ***Obsolete, S/S by AMS 4911***
Alloy: 6AL-4V “AB-1”
Product Forms: Titanium and Titanium Alloy, Sheet, Strip, and Plate
Condition: Annealed

Please note, the AMS-T-9046 specification covers various Alloys and Conditions. This Spec Sheet is only for the Alloy and Condition listed above.

Composition Analysis
Aluminum: 5.5 – 6.75 Nitrogen (Maximum): 0.05%
Vanadium: 3.5 – 4.5% Hydrogen (Maximum): 0.0125%
Iron (Maximum): 0.30% Other Elements (Maximum, Each): 0.10%
Oxygen (Maximum): 0.20% Other Elements (Total): 0.40%
Carbon (Maximum): 0.08% Titanium: Balance

 

Tensile Properties (Minimums)*
Tensile: 130 – 134 ksi Elongation: 8 – 10%
Yield: 120 – 126 ksi

*Tensile property requirements vary based on orientation, section thickness, and cognizant engineering organization requirements.

Required Acceptance Tests

  • Chemical Composition
  • Microstructure
  • Ultrasonic (where required)
  • Tensile Properties
  • Bend Test (where required)

Disclaimer
The use of this information is strictly voluntary. Information may contain typographical errors, and should be used as a guideline only. This Material Spec Sheet contains generalizations and is in no way a substitution for the AMS-T-9046 specification.

To purchase AMS-T-9046A, please visit: http://standards.sae.org/amst9046a/

Changes may be made to the information contained herein.

PERFORMANCE TITANIUM GROUP: A CUT ABOVE THE REST