AMS 6931

AMS 6931
Revision: “D” issued 12/2017
Alloy: 6AL-4V
Product Forms: Titanium Alloy Bars, Forgings, and Forging Stock
Condition: Annealed

Composition Analysis
Aluminum: 5.5 – 6.75% Nitrogen (Maximum): 0.05%
Vanadium: 3.5 – 4.5% Hydrogen (Maximum): 0.0125%
Iron (Maximum): 0.30% Yttrium (Maximum): 0.005%
Oxygen (Maximum): 0.20% Other Elements (Total): 0.40%
Carbon (Maximum): 0.08% Titanium: Balance

 

Tensile Properties (Minimums)*
Tensile: 130 ksi Elongation: 8 – 10%
Yield: 119-120 ksi Reduction of Area: 15 – 25%

*Tensile property requirements vary based on orientation, section thickness/diameter, and cognizant engineering organization requirements.

Required Acceptance Tests

  • Chemical Composition
  • Tensile Properties
  • Microstructure
  • Surface Contamination
  • Macrostructure
  • Ultrasonic (where required)

Disclaimer
The use of this information is strictly voluntary. Information may contain typographical errors, and should be used as a guideline only. This Material Spec Sheet contains generalizations and is in no way a substitution for the AMS 6931 specification.

To purchase AMS 6931D, please visit: http://standards.sae.org/ams6931d/

Changes may be made to the information contained herein.

PERFORMANCE TITANIUM GROUP: A CUT ABOVE THE REST