AMS-T-9046 AB-3 6AL-6V-2Sn

AMS-T-9046
Revision: “A” issued 07/2002 ***Obsolete, S/S by AMS 4918***
Alloy: 6AL-6V-2Sn “AB-3”
Product Forms: Titanium and Titanium Alloy, Sheet, Strip, and Plate
Condition: Annealed
Please note, the AMS-T-9046 specification covers various Alloys and Conditions. This Spec Sheet is only for the Alloy and Condition listed above.

Composition Analysis
Aluminum: 5-6%	Carbon (Maximum): 0.05%
Vanadium: 5-6%	Nitrogen (Maximum): 0.04%
Tin: 1.5-2.5%	Hydrogen (Maximum): 0.015%
Iron (Maximum): 0.35-1.0%	Yttrium (Maximum): 0.005%
Oxygen (Maximum): 0.20%	Other Elements (Total): 0.30%
Copper: 0.35-1.0%	Titanium: Balance

 

Tensile Properties (Minimums)*
Tensile: 145-155 ksi	Elongation: 6 – 10%
Yield: 135-170 ksi

*Tensile property requirements vary based on orientation, section thickness, and cognizant engineering organization requirements.

Required Acceptance Tests

• Chemical Composition
• Microstructure
• Ultrasonic (where required)
• Tensile Properties
• Bend Test (where required)

Disclaimer
The use of this information is strictly voluntary. Information may contain typographical errors, and should be used as a guideline only. This Material Spec Sheet contains generalizations and is in no way a substitution for the AMS-T-9046 specification.

To purchase AMS-T-9046B, please visit: http://standards.sae.org/amst9046b/

Changes may be made to the information contained herein.