AMS 4930

AMS 4930
Revision: “-L” issued 10/2020
Alloy: 6AL-4V Eli
Product Forms: Titanium Alloy Bars, Wire, Forgings, and Rings
Condition: Annealed

Composition Analysis
Aluminum: 5.5 – 6.5%	Nitrogen (Maximum): 0.05%
Vanadium: 3.5 – 4.5%	Hydrogen (Maximum): 0.0125%
Iron (Maximum): 0.25%	Other Elements (Each): .10%
Oxygen (Maximum): 0.13%	Other Elements (Total): .40%
Carbon (Maximum): 0.08%	Titanium: Balance

 

Tensile Properties (Minimums)*
Tensile: 120 – 125 ksi	Elongation: 8 – 10%
Yield: 110 – 115 ksi	Reduction of Area: 15 – 25%

*Tensile property requirements vary based on orientation, section thickness/diameter, and cognizant engineering organization requirements.

Required Acceptance Tests

• Chemical Composition
• Tensile Properties
• Microstructure
• Surface Contamination

Disclaimer
The use of this information is strictly voluntary. Information may contain typographical errors, and should be used as a guideline only. This Material Spec Sheet contains generalizations and is in no way a substitution for the AMS 4930 specification.

To purchase AMS 4930L, please visit: http://standards.sae.org/ams4930/

Changes may be made to the information contained herein.