MIL-T-9046 CP-1 GRADE 4

MIL-T-9046
Revision: “J” issued 01/1983 ***Obsolete, S/S by AMS-T-9046***
Grade: Commercially Pure Grade 4 (CP-1, 70 ksi min yield)
Product Forms: Titanium and Titanium Alloy, Sheet, Strip, and Plate
Condition: Annealed
Please note, the MIL-T-9046 specification covers various Alloys and Conditions. This Spec Sheet is only for the Alloy and Condition listed above.

Composition Analysis
Carbon (Maximum): 0.08%	Hydrogen (Maximum): 0.015%
Nitrogen (Maximum): 0.05%	Other Elements (Total): 0.30%
Iron (Maximum): 0.50%	Titanium: Balance
Oxygen (Maximum): 0.40%

 

Tensile Properties (Minimums)*
Tensile: 80 ksi Min	Elongation: 15% Min
Yield: 70 – 95 ksi

*Tensile property requirements vary based on orientation, section thickness, and cognizant engineering organization requirements.

Required Acceptance Tests

• Chemical Composition
• Microstructure
• Ultrasonic (where required)
• Tensile Properties
• Bend Test (where required)

Disclaimer
The use of this information is strictly voluntary. Information may contain typographical errors, and should be used as a guideline only. This Material Spec Sheet contains generalizations and is in no way a substitution for the MIL-T-9046 specification.

To download MIL-T-9046J, please visit: https://assist.dla.mil/online/start/

Changes may be made to the information contained herein.